Dragon Cables
Black Dragon Phono Cable
$250.00 USDThe Black Dragon Phono Cable will enhance the performance of your vinyl collection, adding body and immediacy for an elevated listening experience. Crafted with precision and expertise, the Black Dragon Phono Cable is the perfect bridge between your Turntable and Phono Preamplifier, ensuring pristine audio transmission with every note.
Sold as a single cable option, the Black Dragon Phono Cable can be configured in a DIN to RCA, DIN to XLR, or RCA to RCA, all with ground leads for your Turntable to Phono Preamplifier (preamp) connection. The Black Dragon Phono Cable is crafted with precision and expertise. Engineered with the utmost attention to detail, the Black Dragon Phono Cable promises unrivaled clarity, fidelity, and performance, making it a must-have for any audiophile seeking the pinnacle of sound quality in their hi-fi setup. This is the Turntable Cable for you.
Quality You Can Trust
Most stock headphone cables are made of poor, ultra-thin conductors that work as a bottleneck for sound. Poor geometries, no shielding, rubber jackets, and a whole host of other issues in OEM cables can limit the performance of the headphone driver in terms of clarity and definition.
Dragon Cables are handcrafted from quality materials in Moon Audio's headquarters in Cary, North Carolina. All of our cables are created with ultra-pure, single-crystal silver and copper strands and engineered to provide the cleanest, most musical presentation. Our wire is void of impurities and crystalline boundaries, leaving nothing between you and your music.
Black Dragon Sound Signature
The Black Dragon is warm and smooth with a musical presentation. Copper strands enhance the body, shape, and immediacy of the music. The detail and expansiveness of the Black Dragon make it a flexible fit where a broad range of musical genres are played. It can also improve bass frequencies on bass-light headphones.
The smooth, musical quality makes it a perfect fit for headphones that tend to sound a bit edgy or bright. Despite its warmth, the Black Dragon does not have a laid back, lush sound. It is much closer to neutral, making it a very natural sounding cable.
For more information on finding your signature sound, visit our Sound Signature Guide.
"The air and separation of the musicians and instruments were more noticeable. Vocals became crisper and the transparency increased [with the Silver Dragon] ... I forgot about the cables and just enjoyed the music."
Frank Iacone, Positive Feedback | Issue 73, May/June 2014
Cable Design
We are offering various connection options, if you don't see what you might need please contact us for customization. Available in three connection options, each Black Dragon Phono Cable is constructed using high-quality materials and exceptional craftsmanship.
We recommend a 60-hour break-in time, as copper takes a bit to break in, but straight out of the box you will be amazed. Our award-winning Dragon Audio Cable designs come highly recommended.
DIN to RCA
Featuring high-quality Cardas 5-pin DIN connectors on one end and RCA connectors on the other, the Silver Dragon Phono Cable is the ideal solution for connecting turntables equipped with DIN plugs to Phono Preamplifiers or other audio devices with RCA inputs.
The Silver Dragon Phono Cable uses 4 x 99.99998% UP-OCC Stranded Silver 24AWG Teflon insulated stranded conductors with a dual layer shield to make sure your Phono Preamplifier picks up no outside interference. A Silver Plated Copper 26Awg drain wire is utilized for grounding your turntable. No need for adaptors, converters, or splitters with this high-quality custom-made DIN to RCA phono cable.
DIN to XLR
Featuring high-quality Cardas 5-pin DIN connectors on one end and XLR connectors on the other, the Silver Dragon Phono Cable is the ideal solution for connecting turntables equipped with DIN plugs to balanced Phono Preamplifiers and other audio gear with XLR inputs.
The Silver Dragon Phono Cable uses 4 x 99.99998% UP-OCC Stranded Silver 24AWG Teflon insulated stranded conductors with a dual layer shield to make sure your Phono Preamplifier picks up no outside interference. A Silver Plated Copper 26Awg drain wire is utilized for grounding your turntable.
The UP-OCC Stranded Silver 24AWG Teflon insulated stranded conductors are soldered to the the connector option of your choice with Mundorf Msolder SUPREME SilverGold. The design offers a ton of detail and resolution without giving up any of the musicality your vinyl will produce.
RCA to RCA
Featuring high-quality Cardas or WBT RCA connectors on each end, the Silver Dragon Phono Cable is the ideal solution for connecting turntables equipped with RCA connectors to a Phono Preamplifier and other audio gear with RCA inputs.
The Silver Dragon Phono Cable uses 4 x 99.99998% UP-OCC Stranded Silver 24AWG Teflon insulated stranded conductors with a dual layer shield to make sure your Phono Preamplifier picks up no outside interference. A Silver Plated Copper 26Awg drain wire is utilized for grounding your turntable.
The UP-OCC Stranded Silver 24AWG Teflon insulated stranded conductors are soldered to the connector option of your choice with Mundorf Msolder SUPREME SilverGold. The design offers a ton of detail and resolution without giving up any of the musicality your vinyl will produce.
Cable Design
- Conductors
- 4 x 24AWG. 1 x 26 AWG
- Material
- 99.99998% UP-OCC Silver
- 15-18% UP Silver Plated Copper
- Construction
- Stranded Quad four design, Stranded Drain Wire
- Solder
- Mundorf Msolder SUPREME SilverGold
- Jacket
- Black Carbon Techflex with Polyethylene base jacket
- Format
- Interconnect (single)
Features
- Application
- Phono (male plug - DIN 5-pin male)
- Sound Signature
- Warm and Musical
- Break-In Time
- 60 Hours
Dragon Audio Cables are covered by a one-year limited warranty against material or manufacturing defects. For more information, visit our Warranty Terms page.